Introduction to Pressure Reducing ValvesPressure reducing valves are essential components in many fluid systems, such as water supply networks, industrial pipelines, and heating systems. Their prim...
A steam trap is a kind of valve, also called a trap, and a drain valve. It drains condensate, air, and carbon dioxide gas in the steam system as soon as possible, while automatically preventing ste...
Beginners of valves always mistakenly believe that the faucet is a valve. In fact, the faucet actually belongs to the bathroom series. Valves are divided into gate valves, butterfly valves, globe v...
The safety valve is one of the important safety accessories of the boiler pressure vessel and all pressure equipment. It is an automatic valve. When the pressure equipment exceeds the allowable wor...
The interior of the bellows globe valve is a bellows. The lower end of the stainless steel bellows is welded to the valve stem to prevent the valve stem from being corroded by the fluid. The other end
The bellows gate valve is the most widely used valve at present. Due to the small opening and closing process of the friction of the sealing surface, it is durable, the opening height is not large,...
The basic function of the steam trap is to expel the condensate, air and carbon dioxide gas in the steam system as soon as possible, and at the same time automatically prevent the leakage of steam ...
Both the low-lift safety valve and the full-lift safety valve are used to ensure the safety of pressure pipes. Its opening and closing parts are normally closed under the action of external force. ...
The key component of the HERO bellows valve is the cut-off bellows made of TFM1705 PTFE. In addition to resisting the corrosion of various chemical media...
The operating pressure determines the nominal pressure of the safety valve, the operating temperature determines the operating temperature range of the safety valve...
Bellows sealed valves are generally used in applications requiring zero leakage of media, such as steam systems, thermal oil systems, chemical industry systems, et
The pressure resistance of the bellows actually belongs to the strength category of the bellows. The key to the calculation is stress analysis, which means analyzing the stress on the bellows wall.
What are the characteristics of the valve specialty store? After analyzing the four types of international and domestic specialty chain stores, it is found that the successful case of the safety valve
